Skip to content

Kids' checkups and new patient visits, set up at (617) 668-1163

(617) 668-1163

ServicesSpace Maintainers

Space Maintainers in Somerville

Losing a baby molar early to decay or an extraction lets the teeth beside it drift into the empty spot. A space maintainer keeps that gap the right width until the adult tooth comes in, and we check and adjust it at each visit until it is time to remove it.

Pediatric dentist in navy scrubs examining a reclined young girl's mouth while an assistant holds suction, with a small metal space maintainer on the instrument tray

Why a Missing Baby Molar Needs a Placeholder

Baby molars do more than chew. Their crowns reserve the exact width the premolars below will need years from now. When one is lost too soon, the first permanent molar behind it often tips and creeps forward, and the teeth in front can lean backward into the opening. Losing even a few millimeters can leave a premolar coming in crooked, blocked or stuck under the gum.

Most of these appliances are simple. The usual design is a stainless steel ring cemented to the tooth beside the opening, with a bent wire arm that spans the empty spot and touches the next tooth over, like a small doorstop. Keeping space is much easier than regaining it later with braces. We treat it as part of caring for your child's bite over time: we place it, check it at each checkup and take it off when the adult tooth is ready.

Some early losses never need one. Which tooth came out, when it happened and how near the adult tooth is to coming in all play a part, and we show you the x-ray and explain our thinking before we suggest anything.

What the Work Includes

X-rays of the adult tooth
We confirm the adult tooth is there, see how much of its root has formed and how much bone sits above it. That shows us whether an appliance will help and about how many months or years it should stay.
Picking the design
A band and loop fits a single missing molar. A lower lingual holding arch or an upper Nance appliance protects gaps on both sides. A distal shoe guides a first permanent molar that has not come in yet when the second baby molar is lost very young.
Sizing and impressions
We size a band for the anchor tooth, sometimes after a few days with small elastic separators, then take an impression or digital scan so the lab can shape the wire to fit your child.
Setting the appliance
We cement the finished appliance with a glass ionomer cement, which slowly releases a small amount of fluoride around the band. Then we check the bite and make sure the wire clears the gums.
Checks at every recall visit
During each cleaning we test the band for movement, look for trapped food and follow the adult tooth on x-rays. Once it starts to break through, we take the appliance off.

When a Space Maintainer Makes Sense

  • A back baby tooth was lost too soon

    Baby molars usually stay until around age 10 to 12. If one had to come out for decay or infection well before then, the gap should be looked at soon, because neighboring teeth can start shifting within months.

  • The opening looks smaller

    If the gap seems narrower than it did right after the tooth came out, the teeth around it are already moving. Acting sooner saves more of the remaining room.

  • An extraction is on the schedule

    When we plan to remove a baby molar, we often plan the appliance alongside it so the gap is covered from the start.

  • The appliance is loose or rubbing

    A band that wiggles, a wire pressing into the gum or an appliance that popped off while eating all need a visit. Save any piece that comes out and bring it along.

  • An adult tooth is peeking through

    A new tooth edge showing under or next to the wire means the appliance has done its work. It should come out so it does not get in the tooth's way.

What Moves the Cost

Most of the cost comes from the appliance design and the lab time it takes to build. Before anything goes to the lab, we walk you through the plan and the expected charges, and our team can look into your benefits. For payment, MasterCard, Visa and Discover all work, along with most insurance plans and the CareCredit Patient Payment Plan.

Appliance design

A band and loop for one tooth uses less wire and less lab work than a holding arch or a distal shoe.

One gap or two

When molars are missing on both sides of the same jaw, one arch across the palate or tongue side usually replaces two separate appliances.

Other treatment on the day

X-rays, an extraction or a crown on the tooth that anchors the band add to the visit when your child needs them.

Fixing versus remaking

A band that has loosened can often be cleaned and cemented back on. A wire that is bent or snapped may mean building a new one.

Your plan's rules

Many dental plans cover space maintainers for kids, though age limits and coverage levels differ from plan to plan.

How the Appointments Run

  1. 1

    Exam and x-rays

    We study the gap, the bite and the x-ray, then explain whether an appliance makes sense and which design fits. Your child can stay beside you while we talk it through.

  2. 2

    Fitting visit

    We try bands until one fits the anchor tooth snugly, then capture the shape of the teeth with an impression or a scan. Most kids need no numbing for this; if your child gets very nervous, ask us about sedation dentistry.

  3. 3

    Lab fabrication

    A dental lab solders the wire to the band to match your child's model. There is usually a short wait between the two visits.

  4. 4

    Cementation

    We clean and dry the tooth, cement the appliance, remove any extra cement and check how the teeth meet. Cheeks and tongue tend to get used to it within a few days.

  5. 5

    Follow-up and removal

    We look at it during regular cleanings and take it off when the adult tooth begins to appear. Removal takes a few minutes and needs no numbing.

Masked dentist in gray scrubs sits beside a young girl in a blue dental chair, talking with her mother seated nearby in a treatment room with a dinosaur mural

Space Maintainer Questions from Parents

Does my child need one for every baby tooth lost early?

Not always. Gaps left by front baby teeth usually stay steady on their own. Back molars are the concern, especially when the adult tooth is still years away. If the x-ray shows the adult tooth is nearly ready, we may simply keep an eye on the gap.

Is getting a space maintainer painful?

Most kids find it painless. The small separators can make teeth feel snug for a day or two, and the band feels strange at first. Mild soreness passes quickly. Sharp pain, or a wire resting on the gum, means we should take a look.

Which foods cause trouble?

Sticky foods like caramel, taffy, chewing gum and fruit snacks can tug the band loose or bend the wire. Chewing ice or popcorn kernels is risky as well. Remind your child not to play with the wire using a tongue or finger.

How do we keep the anchor tooth from getting cavities?

Plaque builds up around the edge of the band and along the wire, so brush those spots slowly and carefully. Use a fluoride toothpaste, and the fluoride treatment we apply at checkups gives the anchor tooth extra protection.

How many months or years will my child wear it?

That depends on how far along the premolar underneath is. For an older child it may be a matter of months, while a younger child can wear one for a few years. Once the new tooth starts pushing through the gum, the appliance has finished its job, and our x-rays at recall visits tell us when that moment is close.

What should we do if it falls out?

Put the appliance in a small bag and phone us for an appointment. In many cases we clean it and cement it back in place, which is quicker than making a new one.

Protect the Space Before It Closes

If your child lost a baby molar early or has a maintainer that feels loose, we can check the gap and the x-ray and lay out the options. Families come to us from Somerville, Medford, Cambridge and nearby towns.